The Burgess “On Command” bar code reader system is used to communicate and direct the printing plate handling and transport. A bar code on the plate contains information that tells the system how it is to punched, what the bend configuration is and how the plate is to be sorted.

“On Command” Plate to Cylinder Control. Burgess’ “Plate to Cylinder” bend control system allows the operator to program the bender for multiple presses and plate alloys. The operator chooses a specific press type, using a specific plate alloy and sets the bend geometry using actual plate measurements for each individual press cylinder. Each cylinder measurement is then programmed and stored by the On Command System. The system eliminates using one common bend for multiple press cylinders and plate alloys. Bend angles and cutoff adjustments are made electronically without the use of mechanical tools. Adjustments are precise and made within seconds. Each plate is precisely formed to each specific plate cylinder requirement.

“On Command” Touch Pad Control. Burgess’ Computer Touch Pad on Command Control Center prompts the operator through all programming and operation functions. The touch of a finger activates the operator’s command. It even includes a help function for answers to any easy or difficult question. Operating a high precision plate bending system has never been so easy.

“On Command” Press Selector. The Press Selector control system uses a LCD touch screen to activate pre-programmed memories for each desired press. The installer, using an off line computer, programs the memory information. During installation the Burgess installer sets the bender to precisely fit plates for each press. The bend parameters are then stored in press specific memories. Each press can have multiple memories allocated to it for different bend and register requirements. Each press can have a memory allocated for pin-registered plates, edge registered plates and memories that compensate for different metal alloys that may be used for each press.

“On Command” State-Of-The-Art Electronics Control Systems.
Each CTP Automation configuration is carefully designed for function, control, repeatability and 24/7 performance. The electronics manage and monitor all system functions, commands, controls and feedback reporting and troubleshooting. Communication and connection is made easy with Burgess' state-of-the-art network cabling, for precise function control and closed loop feedback and reporting to system operator or press console.

An “On Command” installation includes:
  > Bar Code Reader
  > Module Set-up
  > Programming of Transport routing
  > Programming of Sorting information
  > Programming of Press Information

On Command is also used in conjunction with The Burgess Plate Manager. Data can be collected, reports generated, learn more about it here.

Whether you utilize sheet fed or web, we are ready to help you with your plate management and handling. For more specific information on how we can improve your bottom line, contact us.

 » Back to the Products Overview page or the Products Catalog...
 » Learn more about our fully integrated plate manufacturing solutions here...